EasyManua.ls Logo

H3C MSR810 - Page 259

H3C MSR810
389 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
247
Field
Description
Current Service Status
Service status of the modem:
Service availableThe modem is providing services
correctly.
EmergencyThe modem is providing limited services.
The cellular interface is not available.
No serviceThe modem cannot provide services. The
cellular interface is not available.
Low powerThe modem is in low power mode. The
cellular interface is not available.
Current Roaming Status
Roaming status:
Roaming.
Home.
Network Selection Mode
Network selection mode
Manual.
Automatic.
Current Network Connection
Current network:
No Service.
1xRTT/EVDO HYBRID.
EVDO.
1x RT T.
Unknown.
Downstream Bandwidth Downstream bandwidth, in bps.
Radio Information Radio communication information.
Current RSSI (1xRTT)
Current RSSI of 1xRTT:
An RSSI value in the range of 125 dBm to 75 dBm.
Unknown—No signal.
Current RSSI (EVDO)
Current RSSI of EVDO:
An RSSI value in the ranges of 120 dBm to 60 dBm.
Unknown—No signal.
Current Voltage Current voltage of the UIM card, in mV.
PIN Verification
PIN authentication status:
Disabled.
Enabled.
PIN Status
PIN status:
ReadyThe UIM card is ready.
PIN RequirementRequires you to execute the pin
verify command to enter the PIN for PIN verification.
PUK RequirementRequires you to execute the pin
unlock command to unlock the SIM or UIM card.
Number of Retries remaining Remaining retries available for entering the PIN or PUK.
UIM Status
UIM card status:
OKThe UIM card is normal.
Network RejectThe UIM card is denied access to the
network. The cellular interface is not available.
Not InsertThe UIM card is absent. The cellular
interface is not available.
# Display the call connection information for Cellular 0/0 (LTE network).

Table of Contents