322
Compressed/Error/Total: 0/0/0 packets
Sent:
Compressed/Total: 0/0 packets
Sent/Saved/Total: 0/0/0 bytes
Packet-based compression ratio: 0%
Byte-based compression ratio: 0%
Connections:
Rx/Tx: 16/16
Five-Minute-Miss: 0 (Misses/5Mins)
Max-Miss: 0
DLCI: 17, Serial2/1/0
Received:
Compressed/Error/Total: 0/0/0 packets
Sent:
Compressed/Total: 0/0 packets
Sent/Saved/Total: 0/0/0 bytes
Packet-based compression ratio: 0%
Byte-based compression ratio: 0%
Connections:
Rx/Tx: 16/16
Five-Minute-Miss: 0 (Misses/5Mins)
Max-Miss: 0
Table 59 Command output
Received:
Compressed/Error/Total: 0/0/0 packets
Statistics on received packets:
• Compressed—Number of compressed
packets.
• Error—Number of error packets.
• Total—Total number of packets.
Sent:
Compressed/Total: 0/0 packets
Sent/Saved/Total: 0/0/0 bytes
Packet-based compression ratio: 0%
Byte-based compression ratio: 0%
Statistics on sent packets:
• Compressed—Number of compressed
packets.
• Total—Total number of packets.
• Sent—Actual number of bytes sent.
• Saved—Number of bytes reduced due to the
compression.
• Total—Number of bytes that need to be sent if
no compression is performed.
• Packet-based compression ratio—Ratio of
compressed packets to the total number of
packets (Compressed/Total x 100%).
• Byte-based compression ratio—Ratio of
saved bytes to the total number of bytes
(Saved/Total x 100%).