331
DLCI: 102 Type: Static Interface: Serial2/1/0.1
Encapsulation: Nonstandard
Creation time: 2012/04/01 23:56:14 Status: Active
Input: 0 packets, 0 bytes, 0 dropped
Output: 0 packets, 0 bytes, 0 dropped
# Display detailed information on the PVC identified by DLCI 100 and statistics about data sent and
received on the PVC.
<Sysname> display fr pvc dlci 100
PVC information for interface Serial2/1/0 (DTE, physically up)
DLCI: 100 Type: Dynamic Interface: Serial2/1/0
Encapsulation: IETF Broadcast
Creation time: 2012/04/01 23:55:39 Status: Active
Input: 0 packets, 0 bytes, 0 dropped
Output: 0 packets, 0 bytes, 0 dropped
DE list: 3 DE set packets: 0
Traffic policing: Active
CIR ALLOW: 56000 bps CBS: 56000 bits EBS: 56000 bits
Input: 0 packets, 0 bytes, 0 dropped, 0 set DE packets
Traffic shaping: Inactive
CIR ALLOW: 56000 bps CIR: 56000 bps
CBS: 56000 bits EBS: 56000 bits
Current CIR: 56000 bps
Output: 0 packets, 0 bytes, 0 dropped packets
Delayed: 0 packets, 0 bytes
Output queue: (Urgent queuing: Size/Length/Discards) 0/100/0
Output queue: (Protocol queuing: Size/Length/Discards) 0/500/0
Output queue: (FIFO queuing: Size/Length/Discards) 0/75/0
Table 66 Command output
PVC information for interface Serial2/1/0 (DTE,
physically up)
Information about PVCs on the Frame Relay
interface Serial 2/1/0. The interface is a DTE
interface and is physically up.
The interface types include:
• DTE.
• DCE.
The physical states include:
• physically up.
• physically down.
DLCI: 100, Type: Dynamic, Interface: Serial2/1/0
The type of the PVC identified by DLCI 100 is
Dynamic
. It is created on interface Serial 2/1/0. The
PVC types include:
• Dynamic—The PVC is dynamically learned
through LMI.
• Static—The PVC is statically configured by
using the fr map ip or fr dlci command.
Encapsulation: IETF Broadcast
The encapsulation type of the PVC is IETF. The PVC
allows broadcast packets.
The encapsulation types include:
• IE T F.
• Nonstandard.
To Next Page
Loading...
