358
Input: 0 packets, 0 bytes, 0
dropps
Number of incoming packets, number of incoming bytes, and number of
incoming packets discarded.
Output: 0 packets, 0 bytes, 0
dropps
Number of outgoing packets, number of outgoing bytes, and number of
outgoing packets discarded.
# Display brief information about interface MFR 0/0/2.
<Sysname> display interface mfr 0/0/2 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
MFR0/0/2 DOWN DOWN --
# Display brief information about the MFR interfaces in physically down state.
<Sysname> display interface mfr brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
MFR0/0/2 ADM Administratively
Table 68 Command output
Brief information on interface(s)
under route mode
Brief information about Layer 3 interfaces.
Interface Interface name.
Link
Physical link state of the interface:
• UP—The interface is physically up.
• DOWN—The interface is physically down.
• ADM—The interface has been shut down by using the shutdown
command. To restore the physical state of the interface, use the
undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Data link layer protocol state of the interface:
• UP—The data link layer protocol of the interface is up.
• DOWN—The data link layer protocol of the interface is down.
• UP(s)—The data link layer protocol of the interface is up, but the
link is an on-demand link or does not exist. The (s) attribute
represents the spoofing flag. This value is typical of null interfaces
and loopback interfaces.
Description
Partial or complete interface description set by using the
description
command:
• If you do not specify the description keyword for the display
interface brief command, this field displays only the first 27
characters of the interface description.
• If you specify the description keyword for the display interface
brief command, this field displays the complete interface
description.
To Next Page
Loading...
