6-30
Figure 6-35 Installing an SD card
5. Installing the extended module to the management module. Align the two blue clips on the
extended module with the bracket on the management module, and slowly insert the extended
module downwards until it snaps into space, as shown in Figure 6-36.
Figure 6-36
Installing the dual SD card extended module
6. Install the management module. For more information, see "Installing the management
module."
7. Reconnect the removed cables to the management module.
8. Connect the power cord. For more information, see "Connecting the power cord."
9. Powe
r on the server. For more information, see "Powering on the server."
To Next Page
Loading...
