DIN/ISO programming | Programming variables
4
466
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
#wn(DZ)
Compensation in Z
#wn(DS)
2nd compensation
#wn(BR)
Tool radius 2 (milling tool)
#wn(DC)
Compensation of tool radius 2 (milling tool)
Access to tool data of turret
#wn(select) n = turret pocket number
n = 0 for the current tool
select = designates the information to be
read
Main machining direction
#wn(HR)
0: Undefined
1: +Z
2: +X
3: –Z
4: –X
5: +/–Z
6: +/–X
Execution
#wn(AS)
1: Right-hand
2: Left-hand
Tool orientation
#wn(WL)
Reference: Machining direction of tool)
0: On the contour
1: To the right of the contour
– 1: To the left of the contour
To Next Page
Loading...
