HEIDENHAIN CNC PILOT 640 - Page 628

TURN PLUS | Automatic working plan generation (AWG) submode
7
628
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Machining sequence Recessing
Main mach.
operation
Anc. mach.
operation
Machining location
Design
Recessing
Contour analysis: Determining the Recess
form elements:
Type S (guarding ring – recess type S)
Type D (sealing ring – recess type D)
Type A (recess general)
Type FK (relief turn F) – FK is only machined
using Recessing with inward copying angle
EKW
Sequence: First outside, then inside machining
Machining parameter (with type FK): 1 Global
parameters for finished parts
All
– All recess types; radial/axial machining; Extnl.
and Internal
Type S, Type D,
Type A, Type FK
– Radial/axial machining – Extnl. and Internal
Type S, Type D,
Type A, Type FK
Extnl.
Radial machining – Extnl.
Type S, Type D,
Type A, Type FK
Internal
Radial machining – Internal
Type S, Type D,
Type A, Type FK
Outside/front
Axial machining – Extnl.
Type S, Type D,
Type A, Type FK
Inside/front
Axial machining – Internal