HEIDENHAIN CNC PILOT 640 - Page 627

TURN PLUS | Automatic working plan generation (AWG) submode
7
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
627
Machining sequence Contour recessing
Main mach.
operation
Anc. mach.
operation
Machining location
Design
Contour recessing
Contour analysis: Recess areas (recesses)
are determined and machined according to the
inward copying angle EKW
Sequence: First outside, then inside machining
Machining parameter: 1 Global parameters for
finished parts
All
– Radial/axial machining - outside and inside
Shaft machining: Axial machining on the outside
is executed on the front and back
Longitudinal
machining
Extnl.
Radial machining – Extnl.
Longitudinal
machining
Internal
Radial machining – Internal
Transverse
machining
Outside/front
Axial machining – Extnl.
Transverse
machining
Inside/front
Axial machining – Internal
Recessing and Contour recessing are used alternatively.