CYLINDER
HEADNALVES
8·10
Install the camshaft
111
into
the
cylinder head with its
groove [2] facing forward while holding the rocker
arms
(3]
to
ease
installation.
Install and lighten the bolVwasher [1).
Rotate the crankshaft {1} counterclockwise until
the
-r
mark
[2]
on
the flywheel is aligned with
the
index notch
(3)
on the left crankcase cover.
Apply
engine oil to the cam chain
PI
and cam sprocket
(2J
teeth.
Install the cam chain on the cam sprocket
by
aligning its
lab with the groove
of
the camshaft, making sure that
the
index lines
[3}
on the cam sprocket are flush with
the
top surface
of
the cylinder head as shown (TDC on
the compression stroke).
Install the cam sprocket
to
the camshaft.
Align
~
121
To Next Page