AIR CLEANER
Remove the left fuel tank shroud (page 2-3).
Remove the four screws
[1J
and air cleaner housing
cover
12]
.
Remove
the
air cleaner element
[3J
from the housing.
Pour clean
Pro
Honda Foam Filter Oil or equivalent
(Canada: Honda Foam Filter Oil
or
equivalent)
over
the
entire surface
of
the
air cleaner.
Use both hands
to
evenly spread the oil into the air
cleaner.
Gently squeeze
out
any excess oil (
To
keep
your hands
dry, place the air cleaner
in
a clean plastiC bag before
spleading the
oil into the
air
cleaner).
Clean the inside
of
Ihe
air
cleaner
housing.
Installation is
in
the reverse
order
of
removal.
• When installing
the
air cleaner element, apply
grease to the element all around.
TORQUE:
Air
cleaner housing
cover
screw:
1.5
N'm
(0.
15 kgf'm, 1.
1IbHt
)
CRANKCASE BREATHER
NOTE:
Service more frequently when ridden
in
rain, at full
throttle, or after the motorcycle is washed. Service if the
deposit level can be seen in the drain cap.
Check the crankcase breather drain cap (1].
If deposits has collected, remove the clip [2] and
crankcase breather drain cap.
Drain depoSits into the suitable container.
Install the crankcase breather drain cap and clip.
MAINTENANCE
12J
I1J
Check the crankcase breather hose
(1)
for deterioration,
;::=
=
~~:::
~~
=~'::i~
::::::
~
~~~
damage or leakage.
3-7
To Next Page
Loading...
