Honda CRF110F - Cylinder Removal; Piston Removal

CYLINDER/PISTON
CYLINDER/PISTON
CYLINDER REMOVAL
NOTE :
• Cylinder and piston can be serviced with the engine
installed on the frame.
Remove the cylinder head (page 8.11).
Remove the following:
Be careful not to
drop the guide roller
into the crankcase.
- Cam chain guide roller pin boll 11] and sealing
washe r (2 )
- Guide roller [3]
Be careful not 10 Remove the cylinder [1 ].
damage the mating
surface .
Remove the gasket [11 and dowel pins [2J .
PISTON REMOVAL
Place 8 clean shop Remove the piston pin clip (1] with pliers.
towel over the
Push the piston pin {2] out of the piston
crsnkcsse to
prevent the clip from
falling into the
cronkcaSIt.
9-4
connecting rod, and remove the piston.
[3) and