Honda CRF110F - Starter Clutch Assembly

AL TERNATORISTARTER CLUTCH
STARTER CLUTCH
ASSEMBLY
STARTER DRIVEN GEAR STARTER CLUTCH OUTER
L1mJ
TORX BOLT
16 N'm (1 .6 kgf-m, 121bHt)
SPRAG CLUTCH
Install the sprag clutch [1] into the starter clutch outer ,-------------~~_,
[2] -
[2]
Install the starter clu t ch assembly [1 J on to the flywheel ~===============~
[2] _
•
Apply a locking agent (Three Bond 1322 or equivalent) ;::: = ==;:::: c = o = a t = i" = g =W= ~ = th = ' ~ 6 ::_5 = ± = '_ :: 0 =m=m ===~
to the starter clutch mounting tOD: bot! (1] threads as (0.26 ± 0.04 in) from tip
specified.
Hold the flywheel using Ihe special 1001 and tighten the
bolts to the specified torque .
TOOL:
[2J Flywheel holder 07725·0040001
TORQUE: 16 Nom (1 .6 kgf 'm, 12 IbHt)
[2]
11·8