Honda CRF110F - Frame;Body Panels;Exhaust System Service Information; Frame;Body Panels;Exhaust System Torque Values; Frame;Body Panels;Exhaust System Troubleshooting

FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
GENERAL
This section covers removal and installation of the body panels, fuel lank and exhaust system.
Serious
bums may result if the exhaust system is no l allowed 10 cool before components are removed or serviced.
Always replace the exhaust pipe gaskets after removing the exhaust pipe f rom the engine.
When installing Ihe exhaust system. loosely install all of the exhaust pipe fasteners first. Al ways lighten the exhaust clamps first,
then tighten
Ihe mounting fasteners. If you tighten the mounting fasteners first, Ihe exhaust pipe may not seal proper1y.
Always inspect Ihe exhaust system for leaks after installation.
TORQUE VALUES
IT EM
TROUBLESHOOTING
Excessive exhaust no ise
• Broken exhaust system
• Exhaust gas leak
Poor pe rf orman ce
Deformed exhaust system
Exhaust gas leak
• Clogged muffler
2-2
Q 'TY
REMARK S