Remove the centrifugal clutch outer [1], change dutch
[2J
and
oil
separator plale
131
as
an
assembly.
Remove the collar
(1J
from the crankshaft.
Remove the clutch outer guide
[2J
and coliar [3] from
the mainshaft.
CENTRIFUGAL CLUTCH
DISASSEMBLY/INSPECTION
ONE·
WA
Y CLUTCH
Temporarily install the centrifugal clutch outer to the
crankshaft.
Hold the crankshaft and tum the centrifugal clutch outer
by hand.
Make sure that the centrifugal clutch outer only turns
counterclockwise
as
shown
and
does
not
turn
clockwise.
Remove the centrifugal clutch outer from the
crankshaft.
Remove the snap ring
[1J
and retainer [2].
CLUTCH/GEARSHIFT LINKAGE
10-11
To Next Page
Loading...
