Honda CRF110F - Page 144

CLUTCH/GEARSHIFT LINKAGE
10-10
Remove the clutch lifter bearing [1 ).
Hold the clutch lifter plale {1J and remove the clutch
center lock nul {2] using the special tools.
TOOLS:
(3) Universal holder 07725..0030000
[4] lock nut wrench, 20 x 24 mm 07716-0020100
(5] Extension bar 07716-0020500
or equivalent commercially available in U.S .A.
Remove the washer [1 J.
Loosen the clutch lifter pl ale bolls [2].
Remove the two all separator plate mounting bolls (1].
•