Honda CRF110F - Front Wheel Removal

FRONT WHEEUBRAKE /SUSPENSION/STEERI NG
Apply grease to the throttle cable slider [1 ) sliding
surface and throttle cable end {2J .
Install the throttle pipe [3] on the handlebar.
Set the throttle housing [4] onto the handlebar and
connect the throttle cable to the throttle pipe.
Install the throttle cable slider.
Install the throttle housing cover
[I] .
Align the mating surface
of the throttle housing with the
punch mark on the handlebar.
Tighten the upper screw [2] first, then the lower screw
13] .
Secure the handlebar switch wires with the wire bands ~===============~
{1]
Install the handlebar pad [2].
Instalilhe number plate (page 2-5),
FRONT WHEEL
REMOVAL
Supportlhe motorcycle securely using a safety stand or r-----,c:--- --c
a hoist and raise the front wheel off the ground.
Remove the bolt [1) and front brake cable guide [2] from
the left fork slider.
14-9