CLUTCH/GEARSHIFT LINKAGE
10-6
Remove the clutch adj
us
ter bolt
Pl.
Remove the following:
- Snap ring [1]
- Clutch lifter boss [2]
- Spring
(3
]
KICKSTARTER SPINDLE OIL SEAL
11)
11)
13)
Check
thai the kickstarter spindle oil seal [1] is in
good
,------
-
-~""---~
condition, replace it if necessary.
If
replacing the oil seal, install it until
it
is fully
sealed
.
OIL PASSAGES
Blow open the oil passage of the right crankcase
cover
,-----
--
----------,
with compressed air.
Check the oil passage for any clogs.
•
•