CRANKSHAFTITRANSMISSION/KICKSTARTER
Apply molybdenum oil solution to the starter pinion gear
[1]
inner surface.
Make
sure
thaI
the
Install the starter pinion gear, washer [2] and snap ring
snap ring is firmly
[3}.
seated in the
groove.
Inslall the ratchet spring [1]10 the starter ratchet [2].
Make sure that the Install the starter ratchet
and
snap
ring
[3] to the
snap
ring
is
firmly kicksiarter spindle.
seated
in
the
groove.
[3)
[2)
[2)
[3)
Install the return spring
[1]
to the kickstarter spindle
~=
===
=======:~;;:;;;:;
;;:;~
;::;
12-22
while aligning the spring
end
with the hole
on
the
spindle.
Install the collar
[1]
to the kickstarter spindle while
~~lIIIII
iIIIIII""",
=============:::;
aligning jls groove with the return spring end.
To Next Page