FRONT
WHEEUBRAKE
/SUSPENSION/STEERING
Apply grease to a
new
dust seal
[1
J lips, and install the
dust seal into the right wheel hub.
INSTALLATION
Install the side collar [1] into the right wheel hub.
Install the brake panel
111
into the front wheel.
Install the front wheel between the fork legs while
aligning the brake panel groove with the boss
on
the left
fork slider.
Apply
a thin coat
of
grease to the front axle [2] suriace,
then inslall the front axle from right side.
Inslall and tighten the axle nut [1] to the specified
~~=~
~~
~~cg
~
=
torque.
TORQUE:
59
N'm
(6
.0 k
gf
'm
,44
lbHt)
14·13
To Next Page