General - Functionality Overview
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 1 - 3
1.2 Functionality Overview
NOTE: The functionality overview lists the maximum available I/O hardware.
1.3 Target Audience for this Manual
This manual is intended for service technicians, and bay operators (for
example, truck drivers) who are assigned to install, commission,
service, or operate the MSC-L.
This Installation and Operations manual is aligned with Fusion4 MSC-L
software version A2420.
Functionality MSC-L
Global Ex approvals (ATEX, FM, CSA, IECEx) √
Expandable I/O hardware √
Firmware in-situ upgradeable √
Fully configurable I/O binding √
Diagnostics dashboard √
Configuration upload/download √
Transaction and calibration logs upload/download √
Interface to Fusion4 Portal (printing, and so on) √
Multi language display 11
Free programmable language pack 1
Transaction storage 10000
Alarm log records 2000
Calibration log records 1200
Event records 1000
Comms ports 7
Ethernet ports 3
Single pulse inputs 24
Pulse outputs 4
Digital inputs 36
Digital outputs 52
Analog I/O and RTDs 24
To Next Page
Loading...
