Honeywell Fusion4 MSC-L - 5.11.2.2 Stream Configuration; 5.11.2.3 Stream Configuration - Stream n; 5.11.2.3.1 Stream Configuration - Stream n - Identification

Operation - Interfacing With External Additive Controller
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 81
5.11.2.2 Stream Configuration
To perform the stream configuration
1. On the Main Menu screen, select the Stream Configuration icon.
The Stream Configuration screen appears, which displays the
functions available for stream configuration.
5.11.2.3 Stream Configuration - Stream n
5.11.2.3.1 Stream Configuration - Stream n - Identification
1. On the Stream Configuration - Stream n screen, select
<Identification>.
The following screen appears.
CAUTION! When the MSC-A stream is used as external additive
stream on the MSC-L, care needs to be taken to
ensure the same address is configured on the MSC-L.