Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 112 Installation & Operation Manual
Honeywell
5.13.1.4.1 DI (for both AC# and DC#)
On the System Config . Device . I/O settings screen, select the
available Digital Inputs (DIs), and then select a DI. The following entities
are displayed on the System Config . DI-DC-1 screen.
Entity Description Value range
[Hysteresis time]
With this entity you can set the active
time in milliseconds (ms) of the input
signal before accepting it as a valid
input signal. Hence, the time between
two signal transitions must be greater
than the
[Hysteresis time].
250 ms (default)
[Logic State]
With this entity you can configure the
active input signal to low or high
<Negative>
<Positive>

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English