Operation - System Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 120 Installation & Operation Manual
Honeywell
5.13.1.4.6 PO
On the System Config . Device . I/O Settings screen, select the
available Pulse Outputs (POs). The following entities are displayed on
the System Config . PO-n screen.
[Burn out value]
default = 3.60
Entity Available I/Os
[Pulse output selection]
None, any of the QPIs, FPO
default =
None
Entity Description Value range
To Next Page
Loading...
