Honeywell Fusion4 MSC-L User Manual

Operation - Service Tools
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 12 Installation & Operation Manual
Honeywell
The LAD contains an SD card slot, which is located at the top, front face
of the LAD. See FIGURE 5-7.
FIGURE 5-7 SD card location in LAD (lid opened)
 The SD card uses a FAT file system to allow interpretability with
Microsoft Windows platforms.
 The SD card is used for the storage of the following:
 LAD firmware
 LAD license key
 Generic recipes
 Configuration templates
 Device firmware
 Language packs
 Transaction data
 Calibration data
 Configuration data
 Recipes
 Alarm logs
5.3.4.4.1 Product Type Selection
The selection of an SD card for the LAD is important. Due to the
intrinsically safe design of the LAD, the power drawn by the SD card is
strictly limited. For this reason, commercially available SD cards are

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English