Alarm Handling - Active Alarms
Fusion4 MSC-L Part No.: 4418309_Rev09
6 - 8 Installation & Operation Manual
Honeywell
6.6 Active Alarms
The Active alarms screen displays all active and acknowledged alarms.
See FIGURE 6-1.
FIGURE 6-1 Active Alarms
To change the state of the alarm to <ACKNOWLEDGED>, on the Active
alarm screen, perform the following:
• Scroll to the particular alarm, select <Ack> and then press <OK> on
the IR controller, the LAD, or the keyboard to acknowledge the
alarm. The state of the alarm changes to <ACKNOWLEDGED> and a
new alarm log item is created.
OR
• Scroll to All alarms, select <Ack> and then press <OK> on the IR
controller, the LAD, or keyboard to acknowledge all the alarms.
The state of all the active alarms changes to <ACKNOWLEDGED>
and new alarm log items are created.
To change the state of the alarm to <ALARM_INACTIVE>, on the Active
alarm screen, perform the following:
• Scroll to the particular alarm, select <Reset> and then press <OK>
on the IR controller, the LAD, or the keyboard to reset the alarm.
The state of all the alarms changes to <ALARM_INACTIVE> and a
new alarm log item is created.
OR
• Scroll to the top, to all the alarms, select <Reset> and then press
<OK> on the IR controller, the LAD, or keyboard to reset the
To Next Page
Loading...
