System Description - PCB Layout
Fusion4 MSC-L Part No.: 4418309_Rev09
3- 30 Installation & Operation Manual
Honeywell
3.6.1.2.2 Component Locations
FIGURE 3-19 CAN-ARM-MSC component locations
Item
reference
Description
CN1, CN2 Connectors for interfacing with the ARM1-BACKPLANE-MSC or
ARM2-BACKPLANE-MSC.
CN3 Programming connector for U56 (ARM controller).
CN4 Programming connector for U46 (PI processor -Cortex M0).
JP7 2-wire RS-485 communication interface
JP8 2-wire RS-485 communication interface
To Next Page
Loading...
