Honeywell Fusion4 MSC-L - 5.11 Interfacing With External Additive Controller

Operation - Interfacing With External Additive Controller
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 78 Installation & Operation Manual
Honeywell
5.11 Interfacing With External Additive Controller
Starting from release R340 (A2420), MSC-L supports interface to
external additive controller like MSC-A over RS485. This enables usage
of external additive streams in MSC-L batches. The external additive
interface of MSC-L has been qualified with one MSC-A and up to six
external additive streams per Arm board.
FIGURE 5-27 MSC-L to MSC-A interface over RS485