Honeywell Fusion4 MSC-L User Manual

Operation - W&M Compliance
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 324 Installation & Operation Manual
Honeywell
5.26.3 Device Health
For the MSC-L to be W&M compliant the device health should be good.
The device health is good in the following scenarios:
 All the hardware is available and functional.
 All memory and interface checks are passed.
 All boards are in valid temperature range.
 All board voltages are in valid range.
If any of the board has bad or uncertain health the device health is bad.
NOTE: CAN-IN-OUT-MSC board is not taken into account
because of non relevance for W&M.
5.26.4 MSC-L W&M compliance
The MSC-L is compliant for W&M custody transfer if all the following
criteria are met.
 The W&M Intended is set to <True>.
 The MSC-L is W&M sealed - either the jumper in ON or the switch is
activated.
 The device health is good.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English