Operation - System Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 126 Installation & Operation Manual
Honeywell
5.13.1.5.5 System Config . Alarms . Fixed
1. On the System Config . Device . Alarms screen, select <Fixed>.
The System Config . Alarms . Fixed screen appears.
2. On this screen the following entity is displayed.
5.13.1.6 System Config . Device . Authorization
On the System Config . Device screen, select <Authorization>.
Entity Description Value range
[Power supply fault]
With this entity you can configure an
alarm that is triggered when there is a
power supply fault.
<Disabled> (default)
<Display>
<Display shutdown>
<Display pause>
[Loss of TAS Comms.]
With this entity you can configure an
alarm that is triggered when there is a
loss in TAS Comms.
<Disabled> (default)
<Display>
<Display shutdown>
<Display pause>
To Next Page
Loading...
