Honeywell Fusion4 MSC-L - 5.15 Arm Configuration

Operation - Arm Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 193
5.15 Arm Configuration
To perform the Arm Configuration
1. On the Main Menu screen, select the Arm Configuration icon.
The Arm Configuration . Arm Selection screen appears.
2. On the Arm Configuration . Arm Selection screen, select the
required arm. For example, Arm 1.
The Arm Configuration . Arm n screen appears with the following
entities.