Honeywell Fusion4 MSC-L User Manual

Operation - LAD Functions
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 296 Installation & Operation Manual
Honeywell
The Transfer Progress screen appears for the particular file
selected, displaying the progress of the file download and the status
of the installation in the LAD.
a) FM-IN-OUT-APP.bin (if required)
- The total time for the firmware update file is 35 seconds
approximately.
- If there are more than one CAN-IN-OUT-MSC boards, firmware
on all those boards gets updated simultaneously.
- Update the file only if it is available.
b) FM-ARM-FC-APP.bin
- The total time for the firmware update file is 2 minutes approxi-
mately.
- If there are more than one CAN-ARM-MSC boards, firmware
on all those boards are updated simultaneously.
c) FM-HMI-FC-APP.bin
- The total time for the firmware update file is 3.5 minutes
approximately.
d) FM-HMI-FC-FPGA.bin
- The total time for the firmware update file is 3 minutes approxi-
mately.
- Update the file only if it is available.
e) FM-HMI-FC-IMG.bin
- The total time for the firmware update file is 3 minutes approxi-
mately.
- Update the file only if it is available.
NOTE: Update the files in the above sequence, unless
mentioned in the release notes.
NOTE: Sometimes it is observed that after new firmware
upgrade or license changed, the workflow behaves
incorrectly. If this happens, the device has to be
formatted for complete memory and install workflow
again.
NOTE: Make sure that format memory clear all configurtion
data and all logs.
5.21.2.1 Verify the Firmware Update
Verify the following to make sure that the files are updated.
1. On the Module Info screen, make sure that the latest version is
available in the column App. version, as shown on the Device/
Module Info screen.
2. Verify the parameter settings to check if they are the same as they
were in the previous old firmware.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English