Honeywell Fusion4 MSC-L User Manual

Operation - Interfacing With External Additive Controller
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 82 Installation & Operation Manual
Honeywell
2. On the Identification screen, set the <Stream address> entity value
matching with the external additive stream address entity value in
MSC-L.
5.11.2.3.2 Stream Configuration - Stream n - I/O Bindings
1. On the Stream Configuration - Stream n - I/O Bindings screen,
select <Inputs>.
The following screen appears.
2. Set <Pacing source> and <Permissive> entity values as <Comms>.
3. Set <Additive stream meter> entity value that is used.
5.11.2.3.3 Stream Configuration - Stream n - Control Settings
1. On the Stream Config - Stream n - Control Settings screen, select
<Additive Control>.
The following screen appears.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English