Honeywell Fusion4 MSC-L - 5.18.3.1 Product Stream Selection

Operation - Calibration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 257
The Calibration . Arm n . Stream Type Selection screen appears.
3. On the Calibration . Arm n . Stream Type Selection screen, select
<Product stream selection> or <Additive stream selection>, to calibrate the
product stream or additive stream accordingly.
See the following sections for more information.
5.18.3.1 Product Stream Selection
1. On the Calibration . Arm n . Stream Type Selection screen, select
<Product stream selection>.
The Calibration . Arm n . Product Streams screen appears.
2. Select any one of the streams. For example, Stream 1.