Honeywell Fusion4 MSC-L User Manual

Operation - Service Technician Operations
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 315
5.23 Service Technician Operations
A service technician generally performs the service activities (for
example, Configuration and Monitoring the Alarms). The advanced
service activities (for example, Upgrade Firmware and Add the users)
are also sometimes performed by the service technician.
A user must be created in the user database with service level SL2 or
SL3 based on the activities that need to be performed.
Holding the <ESC> key on the keyboard anytime during the operation,
displays the log on screen. If the correct password or PIN is entered,
then the Main Menu is displayed.
NOTE: You are automatically logged out in the following
scenarios:
If the time-out is reached and there are no trans-
actions running.
The LAD is not connected.
Session time-out can be configured from Device
Configuration. General Settings.
5.23.1 Configuration Options
A service technician has various options that can be used for
configuring the MSC-L as follows:
 User Interface: Fusion4 LAD, Fusion4 IR interface or keyboard.
 Configuration file: Fusion4 LAD can be used for downloading the
configuration file.
 Fusion4 Portal: The MSC-L can be interfaced to Fusion4 Portal on
the RS-485 or the Ethernet ports.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English