Honeywell Fusion4 MSC-L User Manual

Operation - Stream Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 183
The Additive Stream Config. . Stream n . Leaking Valve screen is
displayed with the following entities.
5.14.2.4.2 No Additive
On the Additive Stream Config . Stream n . Alarms screen, select <No
additive>.
The Additive Stream Config. . Stream n . No Additive screen is
displayed with the following entities.
5.14.2.4.3 No Pump
On the Additive Stream Config . Stream n . Alarms screen, select <No
pump>.
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled>
<Display>
<Display shutdown>
(default)
<Display pause>
[Leaking volume limit]
With this entity you can set the
maximum amount of additive volume
measured
[Leaking timeout period]
before a leaking valve alarm is
generated.
If this limit is exceeded, an alarm
occurs depending on the
[Alarm
action].
<0> ml ... <999> ml
(default =
<100.00> ml)
[Leaking timeout period]
With this entity you can set the time in
seconds in which the
[Leaking volume
limit] is checked.
<1> s... <99> s
(default =
<60> s)
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled> (default)
<Display>
<Display shutdown>
<Display pause>
[No additive timeout]
With this entity you can set the time in
seconds in which additive stream
pulses should be received when the
solenoid is opened. The additive
stream pulses are not received after
the configured
[number of retries] and
an alarm occurs depending on the
[Alarm action].
<1> s... <9> s
(default =
<2> s)

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English