Honeywell Fusion4 MSC-L User Manual

Operation - Recovery Mode
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 321
5.24.2 Left Arm Pane
The left pane displays the status of the arms. Based on the license
used, the number of arms displayed in the left pane varies.
The state of the arm is also indicated by the running, stop, or the pause
symbol.
Following is a sample screen, which shows the paused batch.
5.25 Recovery Mode
Sometimes, MSC-L does not start up properly after incomplete firmware
upgrade and remains in initialization state.
MSC-L can be recovered from this stage by loading firmware again
using Recovery mode.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English