Operation - Truck Driver Operations
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 314 Installation & Operation Manual
Honeywell
5.22.4.3 Batch not Feasible
If the batch validation fails, for example, if the meter configuration and
stream configuration do not match, then after the Batch details screen
batch not feasible message appears.
5.22.4.4 Batch stopped due to an Alarm
If an alarm with action display pause or display shutdown occurs on the
device, the bay, the arm, or the stream, then the loading batch is
paused/stopped, with the display listing the alarms that have occurred.
An SL2 user or higher can clear the alarms so that new batches can be
started on that arm.
To Next Page
Loading...
