Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 131
The System Config . Device . base conditions screen appears.
2. On the System Config . device .base conditions screen, select
each entity to configure the MSC-L.
5.13.1.8 Device Configuration . Workflow Settings
1. On the System Config . Device screen, select <Workflow settings>.
Entity Description Value range
[Base temperature]
With this entity you can configure the
temperature at which the standardize
volume is calculated.
[Value]
default = <15>
[Units]
<Degrees Celsius>
(default)
<Degrees Fahrenheit>
[Base pressure]
With this entity you can configure the
pressure at which the standardize
volume is calculated.
[Value]
default = <0>
[Units]
<Pascal>
<Kilo Pascal>
(default)
<Pounds per Square Inch>
<PSI large>
<Bar>

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English