Honeywell Fusion4 MSC-L - 3.5.2 Interior

System Description - Hardware Structure
Fusion4 MSC-L Part No.: 4418309_Rev09
3- 18 Installation & Operation Manual
Honeywell
3.5.2 Interior

The boards are mounted on the connector slots provided on the
backplanes.
 The CAN-HMI-MSC board is connected to the backplane using a
pair of Sub-D 15 cables. The MSC-SHORTCUT-BOARD, CAN-PSF-
MSC, CAN-ARM-MSC board, and CAN-IN-OUT-MSC boards are
mounted on the connector slots provided on the backplane boards.
The following boards can be placed in the MSC-L.
 MSC-SHORTCUT-BOARD
 ARM1-BACKPLANE-MSC
 ARM2-BACKPLANE-MSC
 EX-IO-HMI-MSC-L
 CAN-PSF-MSC
 CAN-HMI-MSC
 CAN-ARM-MSC
 CAN-IN-OUT-MSC
FIGURE 3-11 PCB configurations, MSC-SHORTCUT-BOARD, and the CAN-HMI-MSC