Honeywell Fusion4 MSC-L User Manual

Operation - Dual Bay Loading Application Overview
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 62 Installation & Operation Manual
Honeywell
System Configuration . Device . I/O Settings . PI . QPI-xx . [Minimum
linear flow rate] = <0.0 kg/min>.
NOTE: The vapour return line is not a controlled stream, but
only monitored.
7. Enable Vapour return
Stream Configuration . Product streams . Stream x . Identification .
[Vapour return] = <ENABLE>
8. Configure alarms
Stream Configuration . Product streams . Stream x . Alarms . No
Product . [Alarm action] = <Disabled>.
NOTE: A regular stream is used as vapour return line, which
means that all features that are part of a stream can
be used, like the block valve.
9. Configure a loading arm
Arm Configuration . Arm x . Control Settings . [Loading type] = <Straight
with VRU>
10. Select a recipe
Arm Configuration . Arm x . Recipes
NOTE: Add the vapour return line as blend 1 in the recipe to
enable the feature.
5.10 Dual Bay Loading Application Overview
5.10.1 About Dual Bay Loading
Fusion4 MSC-L has a dual bay loading feature. This feature enables
multiple users to use the load computer at the same time to load two
different trucks simultaneously; where for each bay/ truck, a transaction
is running/active.
A single operator or a maximum of two truck drivers can use an HMI
and an MSC-L device to perform dual bay loading. However, the two
truck drivers must sequentially operate the device (entering the input
data, setting up batches, and so on). Since multiple batches can be
started at the same time, two transactions run in parallel/simultaneously.
A dual loading bay supports fixed arms and swing arms. A swing arm
can be used on both bays by swinging the arm from one bay to another.
A fixed arm that is fixed to one side of the bay can also be used to
realize dual bay loading. A maximum of 4 arms are supported; where
the arms are either swing arms or fixed arms or a mix of them.
Dual bay loading can be done stand alone or remotely by Terminal
manager.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English