System Description - PCB Layout
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 3 - 35
3.6.2.2 Power Board Connection
The CAN-PSF-MSC is mounted inside the MSC-L Ex-d box through a
DIN41612 F-type 48 pins connector. It is mounted on the ARM-x-
BACKPLANE-MSC and connected to AC input and DC outputs.
The heat generating components are conducted to the enclosure. A
mechanical cooling method is implemented together with the
mechanical design of the enclosure. See FIGURE 3-23 for information
regarding the mechanical specification of CAN-PSF-MSC.
FIGURE 3-23 Mechanical specification drawings
3.6.2.3 Hardware Specifications
The following table specifies the hardware I/O specifications of the AC
port.
Item Conditions Minimum Typical Maximum Unit
Input voltage 100 - 240 V
AC
Input frequency 50 - 60 Hz
Inrush current 230 V
AC
- 33 37.3 A
Power Factor
(at the maximum
current)
115 V
AC
230 V
AC
- 95
90
- %
Power
consumption
- - - 120 W
To Next Page
Loading...
