Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 115
5.13.1.4.3 RTD
On the System Config . Device . I/O settings screen, select an
available RTD. The following entities are displayed on the System
Config . RTD-n screen.
Entity Description Value range
[RTD serial #]
With this entity you can enter the serial
number of the connected PT100
temperature probe.
Alphanumeric string of maximum 8
characters.
[Temperature offset]
With this entity you can insert a
certified thermometer near the RTD
and adjust the MSC-L to read the same
temperature. The temperature offset is
for calibration of the RTD.
default =
0.00 ..°C
[RTD wiring]
With this entity you can set the wiring
configuration of the RTD.
<3 wire>
<4 wire>
(default)
<Unknown>

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English