Operation - Service Tools
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 13
NOT recommended, as the specification and construction of these
devices change frequently.
The following cards are recommended by Honeywell Enraf.
TABLE 6-1 Recommended SD cards
You are allowed to use SD cards not included in TABLE 6-1, but they
must conform to the following specifications.
NOTE: Honeywell Enraf does NOT provide support for any
cards not listed in TABLE 6-1. Contact Honeywell
Enraf for more information.
NOTE: The miniSD and the microSD cards fitted in an SD
adaptor must NOT be used in the LAD.
Manufacturer Series Type Capacity Part Number
SanDisk Industrial SD 2GB SDSDAA-002G
Swissbit S-200 SD 1GB SFSD1024L4BN2SA-E-D1-131-STD
Pretec Industrial SD 1GB SDS001GSBHP
Transcend Industrial SDHC 2GB TS2GSD80I
STEC Industrial SD 1GB SLSD1GBBSIU
Type SD or SDHC
Operating temperature -20 °C to +65 °C [-4 °F to +149 °½F]
Maximum current 70 mA