Honeywell Fusion4 MSC-L User Manual

Operation - Unloading Application Overview
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 57
System Configuration . Device . I/O Settings . PI . QPI-xx . [Minimum
linear flow rate] = <0.0 kg/min>.
NOTE: The vapour return line is not a controlled stream, but
only monitored.
System Configuration . Device . Workflow Settings . Options
[Multiple loads per arm] = <Disabled>
System Configuration . Device . Workflow Settings . Promts
[Preset unloading entry] = <Mandatory or Disabled>
NOTE: The Preset unloading entry can be set either to
Mandatory or Disabled depends on choice made for
operation.
7. Enable Vapour return
Stream Configuration . Product streams . Stream x . Identification .
[Vapour return] = <ENABLE>
8. Configure alarms
Stream Configuration . Product streams . Stream x . Alarms . No
Product . [Alarm action] = <Disabled>.
Arm Configuration . Arm x . Alarms . Stop switch not covered. [Stop
flow switch auto clear time out] = <10 s>.
Arm Configuration . Arm x . Alarms . Fixed. [Invalid switch states] =
<Display pause>.
NOTE: A regular stream is used as vapour return line, which
means that all features that are part of a stream can
be used, like the block valve.
9. Configure a loading arm
Arm Configuration . Arm X . Control Settings . [Loading type] =
<Unloading>
Arm Configuration . Arm X . Control Settings . [Low flow rate] = <300 l/
min>
Arm Configuration . Arm X . Control Settings . [High flow rate] = <1800 l/
min>
Arm Configuration . Arm X . I/O binding. [Stop flow switch] = <Enable>
Arm Configuration . Arm X . I/O binding. [Low flow switch] = <Enable>
Arm Configuration . Arm X . I/O binding. [High flow switch] = <Enable>
10. Select a recipe
Arm Configuration . Arm x . Recipes
NOTE: Add the vapour return line as blend 1 in the recipe to
enable the feature.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English