Honeywell Fusion4 MSC-L - Page 360

Operation - Stream Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 172 Installation & Operation Manual
Honeywell
5.14.1.5.0.10 Vaporizing
On the Stream Config . Stream n . Alarms screen, select <Vaporizing>.
The Stream Config. . Stream n . Vaporizing screen is displayed with
the following entities.
5.14.1.5.0.11 Vaporizing risk
On the Stream Config . Stream n . Alarms screen, select <Vaporizing
risk>.
The Stream Config. . Stream n . Vaporizing risk screen is displayed
with the following entities.
5.14.1.5.0.12 Fixed
On the Stream Config . Stream n . Alarms screen, select <Fixed>.
The Stream Config. . Stream n . Fixed screen is displayed with the
following entities.
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled>
<Display>
<Display shutdown>
<Display pause>
[Alarm hysteresis] <0...10%>
(default = <5> %)
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled>
<Display>
<Display shutdown>
<Display pause>
[Alarm hysteresis] <0....10%>
(default = <5> % )
Entity Description Value range
[Pulse hardware]
With this entity you can configure the
[Pulse hardware] alarm behavior in
case this particular alarm occurs.
<Disabled>
<Display>
<Display shutdown>
(default)
<Display pause>
[Pulse phase]
With this entity you can configure the
[Pulse phase] alarm behavior in case
this particular alarm occurs.
<Disabled>
<Display>
<Display shutdown>
(default)
<Display pause>