Honeywell Fusion4 MSC-L User Manual

Operation - Logs
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 214 Installation & Operation Manual
Honeywell
The Logs screen appears, in which the various logs maintained in
the non-volatile memory can be viewed.
FIGURE 5-32 Logs icon
On the Logs screen, you can view the following data logs.
 Transaction logs: Displays the complete information about all the
available transaction records. The storage space for the transaction
logs in the MSC-L is 10,000 records.
 Calibration logs: Displays the product meter factor and additive
meter factor calibrations over time for all the available calibration
records. The storage space for the calibration logs in the MSC-L is
1200 records.
 Alarm logs: Displays a chronological list of the occurrence of the
alarms and the type of alarms for all the available alarm records. The
storage space for the alarm logs in the MSC-L is 2000 records.
 Events logs: Displays a log of important device events. The storage
space for the event logs in the MSC-L is 1000 records.
 Load Profiles: Displays a log containing a list of Load Profile batches
processed over time. The storage space for the Load Profile logs in
the MSC-L is 100 records.
When the log record is full, the oldest one is automatically deleted and
overwritten. Then, the transaction cannot be retrieved through the
Fusion4 Portal or the LAD.
NOTE: To view the logs, use the right arrow (>) on the LAD
or IR Controller, to view the previous set of records in
a list of records which spans more than a page and
left arrow (<) on the LAD or IR Controller to view the

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English