Honeywell Fusion4 MSC-L - Page 448

Operation - Calibration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 260 Installation & Operation Manual
Honeywell
The Calibration . Stream n . Meter Profile . Manual screen
appears, which displays the Calibration No, Meter Factor, and the
Flowrate.
7. Select <OK> on the IR controller or LAD to save the calibration point.
The Calibration . Stream n . Edit Meter Profile . Manual screen
appears.
8. Select <Save> and then select <OK> on the IR controller or LAD.