Honeywell Fusion4 MSC-L - Page 450

Operation - Calibration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 262 Installation & Operation Manual
Honeywell
The Calibration . Arm n . Additive Streams screen appears.
2. Select any one of the streams. For example, Stream 1.
The Calibration . Stream n . Manual 1/3 screen appears, on which
the new meter factor must be entered.
3. On the Calibration . Stream n . Manual 1/3 screen, enter the new
meter factor and then select <Confirm>.
The Calibration . Stream n . Manual 2/3 screen appears, which
displays the new meter factor.