Honeywell Fusion4 MSC-L User Manual

System Description - MID Compliance
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 3 - 11
FIGURE 3-6 Component-level requirements (Temperature and Pressure accuracy)
The load controller evaluation is quite complex, but in principle it has to
comply with the security of signal and data handling, as required by MID
and working documents of WELMEC.
A very stringent requirement is the EMC standard for industrial use of
electronic equipment. Electro-magnetic noise might influence the
measurement of the metering signal, and this is not allowed to occur
outside the maximum given accuracy.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English