Operation - Truck Driver Operations
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 307
If the batch is executable to load, then the batch details screen
appears with the recipe name, compartment, arm name, and
preset value. If not, an error message appears.
11. Select <Confirm> to perform the batch or select <Cancel> to cancel the
batch.
12. If confirmed, press the Start button on the keyboard to commence
the batch.
The load another compartment prompt appears only if another batch
can begin (that is, there is an idle arm and the maximum number of
simultaneous batches has not been reached.) If a new batch cannot
be planned then the running screen appears.
To Next Page
Loading...
